Views:38 Author:laura Publish Time: 2021-05-12 Origin:Site
Laser cleaning technology is a new type of cleaning technology that has developed rapidly in the past 10 years. It has gradually replaced the traditional cleaning technology in many fields with its own advantages and irreplaceability. Laser cleaning can be used not only to clean organic pollutants, but also inorganic substances, including metal rust, metal particles, dust, etc. The following describes the cleaning application of laser rust cleaning machine in airport runways.
First, understand why airport runways need to be cleaned. Around the world, the pavement of airport runways is mostly made of concrete. In the process of takeoff and landing, rubber particles will fall off after friction between tires and runway road surface, thus attaching rubber marks on the runway road surface of the airport. The accumulated runway glue marks will seriously reduce the skid resistance of the road surface and affect the take-off and landing safety of the aircraft. Therefore, the airport runway needs to be cleaned regularly to remove the rubber marks on the runway.
Traditional cleaning processes will cause irreversible damage to the runway. For this reason, a green and non-destructive cleaning process is urgently needed to effectively remove the rubber marks on the airport runway, ensure the anti-skid property of the runway, and ensure the safe take-off and landing of the aircraft. Rust laser cleaning machine it's a green and non-destructive cleaning process. The laser hand-held cleaning machine is professionally customized for airport runway degumming. It can not only effectively remove the tire rubber layer on the runway, but also will not cause any damage to the airport runway. It is energy-saving and environmentally friendly. It is the first choice for cleaning the runway. equipment. The runway friction value after de-glue has been tested to fully meet the specified standards, which improves the quality of the runway surface and ensures the normal take-off and landing of flights.
The cleaning process of high-power pulsed laser depends on the characteristics of the optical pulse generated by the fiber laser, and is based on the optical physical reaction formed by the interaction between the high-intensity beam, the short-pulse laser and the pollution layer. The physics can be summarized as follows: the beam emitted by the laser is absorbed by a layer of contamination on the surface to be treated. The absorption of large amounts of energy forms a rapidly expanding plasma (highly ionized, unstable gas), creating a shock wave that breaks the pollutants into fragments and removes them. The width of the light pulse must be short enough to avoid the build-up of heat that would damage the surface being treated, where the plasma is generated when there is an oxide on the metal surface. When the technological parameters are appropriate, the pulsed laser can completely clean the rubber of airport runway without damaging the surface of substrate. High power pulse fiber laser, with high average power, high monopulse energy, uniform distribution of spot energy, universal control interface, strong compatibility, adjustable working frequency, high degree of homogenization of light beam, can fully meet the application of cleaning airport runway rubber cleaning.
The above is the rust laser cleaning machine in the airport runway cleaning application, laser cleaning in recent years developed a new cleaning method. Laser cleaning machine is suitable for the operating personnel work alone, low cleaning cost, environmental protection, high efficiency, good cleaning quality, does not hurt the tracks base material, need not apply for railway transportation plan, one hand dragged easy homework finish your homework or automatically by the remote control, the advantage is that existing cleaning method irreplaceable, laser cleaning will gradually replace the traditional cleaning method, If you want to know more about laser cleaning machine 1500w price, please contact senfeng.