Welcome to SENFENG. LoginRegisterSite MapFavorite Contact Us EnglishEnglish
Senfeng News
Current location: HomeSENFENG News Center » FAQ
The Gas For Fiber Laser Cutting Systems[ 03-06 16:00 ]
In order to ensure the best cutting quality, Fiber Laser Cutting systems use the different auxiliary gas depending on different the material. the kind of the gas for fiber laser cutting systems: 1) Air: ① using for cutting ② cooling cutting head ③ dedust ins
How To Maintain Fiber Laser Metal Cutting System ?[ 03-03 16:00 ]
 It is very important to maintain the fiber laser metal cutting system, in the processing of metal ,the operator need to study how to use the fiber laser cutting machine and maintenance skill, then use it rightly and extend the life of the fiber laser sys...
The Industry Application of Metal Laser Cutter Tools and Systems[ 02-23 16:00 ]
 Metal Laser Cutter Tools and Systems has the advantage : High precision, good stability. Work long hours. For bigger working area. Widely used for many materials,especially in hardware industry, sheet metal industry. The application industries for...
What Material That Sheet Metal Laser Cutting System Cut ?[ 02-19 16:00 ]
 Laser cutting machine has been used in many industries, today we talk about what materials are suitable for sheet metal laser cutting system. Sheet metal: mainly for mobile phones, digital products, automobile and motorcycle industries made by stainless...
How To Do If the Co2 Laser Cutting Engraving Machine Is Without Light[ 02-09 16:00 ]
 If you find the Co2 laser cutting engraving machine is without light ,please check as follows: 1,Check whether the water tank alarm A,behind water tankthe ,make the inlet and outlet connection with a pipe, tank energized to see if the alarm. If the it...
Why Co2 Laser Engraving Machine Cannot Engrave Metal?[ 02-08 16:00 ]
 Generally speaking ,co2 laser engraving machine can engrave on many nonmetal materials,like acrylic ,Wood, plexiglass, glass, stone, crystal, paper, color plates, leather,jeans ,etc.The co2 laser engraving machine is a dedicated to artworks and high prec...
What Are The Reasons of Laser Power Down For Laser Marking Machine?[ 01-24 16:00 ]
What Rre The Reasons of Laser Power Down For Laser Marking Machine? When laser marking machineused for a period of time, the output of laser power will be decline, the reason and solutions as following: ① whether the laser cavity is change: fine-tuning the r
The Characteristics of The Metal Laser Cutting System[ 01-17 16:00 ]
 Metal laser cutting system is widely used in the hardware industry. The characteristics of the metal laser cutting system: 1,The laser cutting machine meets the following requirements: high cutting accuracy, stability and efficiency. 2,With high preci...
What Materials Does The Metal Laser Cutting System Cut?[ 12-30 16:00 ]
 Although almost all of the metal material infrared wave energy has a high reflectivity at room temperature , but CO2 laser beam is in the far-infrared emission 10.6um,so metal laser cutting system was successfully used in many metal cutting practices. ...
Maintenance For Metal Laser Cutters China[ 12-29 16:00 ]
Any product needs a good maintenance to get higher rates of use fixed number of year, this is without a doubt,and is every enterprise's daily maintenance for machining tools .What should the maintenance for metal laser cutters china?Do what item to use for long years?
Precautions of Senfeng Laser Cutting Machine[ 12-21 16:00 ]
Laser cutting machine is dangerous when there is something wrong during the working .The newcomers need to get professionals training then to operate the machine.Here are some considerations: 1. Observe the general safety rules . Strictly start the laser cu...
Laser Cutting Equipment Category[ 12-12 16:00 ]
 There are three kinds of Laser cutting equipment on the market : YAG laser cutting machine, CO2 laser cutting machine, fiber laser cutting machine: 1, YAG laser cutting machine. The laser cutting equipment with low price and good stability properties, m...
Total number of records:129 | Pages:11  <...234567891011  

Contact Senfeng



Email: senfeng@sfcnclaser.com

Add:No.6333 North Lingang Road, Yaoqiang Street Office, High-tech Industrial Development Zone, Ji'nan, Shandong, China

Senfeng Home
About Senfeng
Laser cutting machine
Laser engraving machine
Consulting Center
Senfeng dynamic
Industry News
Frequently Asked Questions
Contact Senfeng
Mail: senfeng@sfcnclaser.com
Skype: senfeng laser1