Welcome to SENFENG. LoginRegisterSite MapFavorite Contact Us EnglishEnglish
Senfeng News
Current location: Home»SENFENG News Center » Consulting Center » FAQ » Machine parts of laser cutting machine

Recommended Products

Full Cover Metal Tubes and Plates Laser Cutting Machine
Full Cover Metal Tubes and Plates Laser Cutting Machine
1)Working Area 3000*1500mm 2)Fiber power:1500W to 12KW
Metal Laser Cutting Machine SF3015G
Metal Laser Cutting Machine SF3015G
1)Working area:3000mm*1500mm
2)Laser power: 500W/750W/1000W/1500W/2000W/3000W
3)Model: 2513G/3015G/4015G/4020G/6015G/6020G
3D Robot Laser Automation System SF-20RFLS
3D Robot Laser Automation System SF-20RFLS
High Precision Small Fiber Laser Cutting Machine P6
High Precision Small Fiber Laser Cutting Machine P6
1) Working area: 600mm *600mm
2)Power:300w/500w/750w/1000w
Fiber Laser Cutting Machine Price SF3015A
Fiber Laser Cutting Machine Price SF3015A
1)Working area: 3000mm*1500mm
2)Fiber power: 500w/750w/1000w/1500w/2000w/3000w
Sheet Metal And Tubes Fiber Laser Cutting Machine SF3015M3
Sheet Metal And Tubes Fiber Laser Cutting Machine SF3015M3

Top articles

Latest articles

Your browsing history

    Loading...

Machine parts of laser cutting machine

Categories: FAQ Visit: - Release time: 2014-08-12 15:46:00
Font size:【 Large Middle Small Source: Editor: Author:

Common most important laser machine parts including laser tube,laser power,what chiller,air pump etc.
1 laser tube

laser tube for laser cutting The laser tube is applicable for cutting, engraving, marking on non-metal materials. 

It brings huge economic benefit and unlimited market prospect, 
winning great attentions.
There are various laser tubes with different powers 
to choose from such as 60W laser tube, 
80W laser tube, 130W 150W laser tube (big power laser tube), etc. 
As a high-quality laser machine spare part,
 it works well with all kinds of CO2 laser processing
equipment like laser marking machine,
laser cutting machine and laser engraving machine.
2 water chiller 
This series of water chillers adopt intelligent controller, which need not adjust the control parameters 
under normal circumstances, it will automatically adjust control parameters according to  room temperature changes,

to meet the cooling requirement.water chiller for laser cutting
• CW-5000 water chiller has unique 

   low flow alarm protection function, 

which ensures the cooling water cycle working safely.
• Specific disconnection alarm securing protection.
• Enclosed water tanks, water used for a long time.
• Equipped with alarm output port, can quickly 

  protect sensitive components.
You can choose different models according to

 local voltage and frequency.
• It can extend the using life of laser tube and ensure

                                         the engraving effect better.
3 laser power
power supply have been much more rigorous testing procedures,
under full load high temperature (52~55 degrees celsius) 24 hours of aging, 
laser power for cutting to ensure the stability of each power supply.
can adapt to a number of manufacturers of 60W, 50W, 
40WCO2 laser tube also has a strong adaptability and fast response,
engraving, cutting advantages of good effect.
Laser power control is simple, you can use 0 ~ 5V analog 
signal control the size of the laser power, 
you can also use the PWM (pulse width modulation) 
signal to be controlled.
 
Share:
Inquire:Machine parts of laser cutting machine
Name:
Name:
Mobile:
E-mail:
Enquiry:
Senfeng Home
About Senfeng
Products
Laser cutting machine
Laser engraving machine
Consulting Center
Senfeng dynamic
Industry News
Frequently Asked Questions
Contact Senfeng
Mail: senfeng@sfcnclaser.com
TEL:+86-531-88737920
Skype: senfeng laser1