Welcome to SENFENG. LoginRegisterSite MapFavorite Contact Us简体中文Pусский한국 El español
Senfeng News
Current location: Home»SENFENG News Center » Consulting Center » FAQ » How to Maintain the Laser Cutting Machine In the Winter

Recommended Products

Co2 Laser Engraver and Cutter SF1390i
Co2 Laser Engraver and Cutter SF1390i
1)working size:1250*860mm
Fiber Laser Metal Cutting Machine SF3015A
Fiber Laser Metal Cutting Machine SF3015A
1)working table:3000mm*1500mm
2)fiber laser power: 500w/750w//1000w/1500w/2000w/3000w
SF3015FL Metal Fiber Laser Cutting Machine
SF3015FL Metal Fiber Laser Cutting Machine
1)working size:3000mm*1500mm/2500*1300mm
2)fiber power:300w/500w/750w/1000W
4)cut 0.4 to 5mm SS,0.4 to 12mm CS
SF200F Fiber Laser Marking Machine
SF200F Fiber Laser Marking Machine
1) High speed with galvanometer;
2) 10W/20W/30W fiber device
3) 110*110mm/200*200mm/300*300mm
CCD Fabric Laser Cutter with Dual-beam
CCD Fabric Laser Cutter with Dual-beam
1)working area:1800mm*1000mm

Top articles

Latest articles

Your browsing history


How to Maintain the Laser Cutting Machine In the Winter

Categories: FAQ Visit: - Release time: 2017-12-07 16:00:00
Font size:【 Large Middle Small Source: SENFENG Editor: Senfeng Crystal Author: Senfeng Crystal

The winter is coming,people will pay attention to the efficiency of the machine.At the same time, we also need to do some testing and maintenance of the machine.For the laser cutting machine,it is necessary to do the special maintenance.Otherwise,it will affect the progress and efficiency of production, even  the useful life of the equipment. We made a maintenance program according to the climatic characteristics of the winter.


First of all, the temperature.The temperature has little effect on the laser cutting machine.But many customers will add butter on the screw,and they will forget to clean up in the winter.The machine does not work when it is turned on.At this moment, we must ensure that the temperature in the workshop reaches the lowest temperature of the fueling standard.

The second is the cooling water.because the cooling water needs to be replaced everyday in the summer to avoid exceeding the specified temperature.Many customers will ignore this point in the cold winter.They think the temperature will not increase too much,it is no need to change the water frequently.Here we need to remind you that the outside temperature is very low, it is hard to feel the fever of the spindle and motor. The cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is too dirty, it will cause serious damage to the motor.So we must ensure the cooling water is clean and the pump works normally.So the laser cutting machine will work well.


Last,we need to clean the scrap around the rails.Cleaning the screw regularly to avoid sticking debris on the screw.The screw is very important,it decides the accuracy of the laser cutting machine, and the screw also plays an important role in the transmission process.

If you want to know more information about the maintenance of the laser cutting machine,welcome to contact us.

Email: senfeng@jnsenfeng.com



Keywords in the article: senfeng laser laser cutting machine
Inquire:How to Maintain the Laser Cutting Machine In the Winter
Senfeng Home
About Senfeng
Laser cutting machine
Laser engraving machine
Consulting Center
Senfeng dynamic
Industry News
Frequently Asked Questions
Contact Senfeng
Mail: senfeng@jnsenfeng.com
Skype: senfeng laser1